Unitron MEC2 Especificaciones descargar pdf (Pagina 14)

MEC2 INVERTED METALLURGICAL MICROSCOPE

UNITRON

73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com 14

Light Path

Selecting Lever

Illumination Application

Pushed In 100% for binocular observation Binocular observation

Pulled Out 20% for binocular observation

80% for video or

microphotography

Binocular observation and video

(CCTV) or microphotography

simultaneously

Polarization Observation

1. Insert the polarizer and analyzer as described on page 8 (Figures 10 & 11).

2. The analyzer hand wheel can be rotated from 0 °to 90°. When the field of view becomes the darkest,

the polarization position has been obtained and polarized observation can be performed.

MICROSCOPE VIDEO

AND PHOTOGRAPHY

Video Microscopy

Selecting the Light Path (Figure 24)

1. Push in the light path selector (1) completely.

2. Using binocular observation, focus your

specimen.

3. Pull out the light path selector completely.

Installing the Video Adapter (Figure 25)

1. Loosen the thumb screw ① on the trinocular

viewing tube, and remove the dust cap②.

2. Remove the dust covers on the both ends of the

video adapter③.

3. Insert the flanged end into the trinocular viewing

head and tighten the thumb screw.

4. The threaded video C-mount should be facing

upwards.

Fig. 24

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Unitron MEC2 Especificaciones Pagina 14