Unitron TrueFit software instruction guide v2.2
26
will be limited such that the generated noise never exceeds a level of 85 dB(A),
assuming at least 8 hours of use / day to address concerns regarding the impact of
continued noise exposure on hearing sensitivity from NIOSH guidelines.
Note: The tinnitus masker settings are global for the Automatic Program, so they will
be the same in all Automatic Program environments, but the settings can vary across
manual programs.
Automatic Controls
Note: This option is available when the automatic program or one of its environments
are selected.
1. Click the Automatic Controls task item at the bottom of the screen.
2. If desired, select the client’s Highest Priority and Lowest Priority environments
from the provided drop-down menus.
3. If desired, adjust the Sensitivity control using the provided drop down menu to
impact how quickly the Automatic Program responds to changes in the
environment.
Note: The automatic controls should be left in their default positions for the initial
fitting and reviewed later if the client has concerns regarding the instruments’
switching behaviour.
Note: This feature is global for all Automatic Program environments.
Binaural Phone
Note: This feature is available when a telephone program is selected in a binaural
fitting with some wireless products.
1. Click the Binaural Phone task item at the bottom of the screen.
2. Click the Enable Binaural Phone check box to activate this feature.
Note: This feature is active by default.
3. Select the client’s Preferred Phone Ear from the provided drop-down menu. This
choice impacts the streaming direction when Binaural Phone is activated using
the remote control phone button.
4. Click the Push button selects phone ear check box to have the system stream the
phone signal in either direction based on which push button was used to toggle
into the Binaural Phone program. That is, the phone ear is identified as the side
which had its push button activated.
Note: When accessing Binaural Phone streaming using easy-t, the phone ear is
automatically identified as the side that triggered easy-t (ie., the ear where the phone
receiver is located).
Note: When binaural phone is activated, the input selection task box offers the ability
to configure phone ear inputs (Telecoil + Microphone with 0 to -30 dB mic
attenuation; or Omni) and non-phone ear inputs (Audio Streaming + Mic with
optional 6 dB mic attenuation available with some products).
MyMusic
Note: This option is available when a music environment or program is selected.
1. Click the MyMusic task item at the bottom of the screen.
2. Choose one of the default offsets from the provided drop-down menu.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales